Six Signs You Need Washing Machine Repair

There’s a Lot of Noise

Unless you’ve accidentally left coins in a pocket, your dryer shouldn’t be making excessive noise. Often, simply rearranging the load to balance the clothes can solve the problem—remember, this should only be done mid-cycle in a top-loading washer, not a front-loading one.
Another potential fix is to ensure the washing machine is level on the floor. If it’s on a platform, adjusting the platform might help. If these steps don’t resolve the issue, the problem could be a loose drum or motor mount. This can sometimes be fixed yourself, or you may need to hire a professional from Appliance Repair SD.

The Drum Isn’t Filling Up With Water

You might have noticed a recurring theme: the drum is a crucial part of your washing machine for cleaning your clothes. Several issues could be to blame if the drum isn’t filling with water at the start of a cycle.
There might be a kink in the hose, or the water faucets might be turned off. It could also be due to a faulty water intake valve or a clogged washing machine filter. If inspecting these components doesn’t reveal the problem, it’s time to call a professional washing machine repair technician.

The Drum Has Stopped Spinning/Agitating

This could be due to an unbalanced load, either too full or too empty. It might also be an issue with the belts or the lid switch. While you might be able to replace a belt, fixing a lid switch is best left to someone with experience.

The Washing Machine Is Leaking Water

Your washing machine is meant to clean your clothes, not flood your home. If you notice puddles forming around the machine, stop using it until you identify the issue. It’s likely a problem with the hose or a loose connection to the water supply, which a professional can usually fix quickly. Be sure to mop up the water promptly to prevent moisture from seeping into floorboards and causing mold growth. The issue could also be a clogged washer drain, which you can try to troubleshoot or call Appliance Repair SD.

There’s an Electrical Issue

If your washer isn’t turning on, ensure it is appropriately plugged in. Sometimes, an uneven load can cause the machine to shake enough to unplug itself, so avoid overloading or underloading your washer in the future.
If the washer is plugged in, ensure the power cord goes directly into a wall socket, not an extension cord or surge protector. The washing machine’s motor requires too much power for an extension cord to handle, which can cause it to overheat and shut down. If this happens, allow the machine to cool down before restarting it.
If the power source isn’t the issue, there could be faulty wiring in your home or the machine itself. Do not attempt to fix this on your own. You should not handle any electrical wiring in your house unless you are a licensed electrician. Trying to fix it yourself can turn a simple problem into a much more expensive repair and pose severe risks of personal injury. This advice applies to any electrical appliance in your home, not just your washing machine.

What to Do If Your Washing Machine Needs Repair

The good news is that if you address a problem promptly, your washing machine can often be repaired instead of needing a replacement. However, following all the manufacturer’s maintenance guidelines is crucial to avoid voiding any warranties that offer free or low-cost repairs. Take good care of your washing machine, which will remain a reliable part of your household for years.