‎‎‎‎(858) 329-0005

Haier Dishwasher won’t drain


Haier Dishwasher won't drain

Clogged sump filters

There are usually two types of filters: coarse and fine. You will experience low water flow if they become clogged. Remove the filters and clean them with warm water and soap. The filters will need to be replaced if the cleaning is ineffective or damaged.

Haier dishwasher drain pump

The impeller in the drain pump forces water into the drain hose. The dishwasher will not drain if the drain pump motor isn’t working. Check the motor continuity with a multimeter to determine if it is the drain pump. Replace the drain pump if the motor is not conductive or does not run. Drain pumps cannot be repaired. If the drain pump has a defect, it must be replaced.

Haier Dishwasher control board

The control board of a dishwasher provides power to almost every electrical component. A defective board may be unable to supply power to the drain pumps, preventing them from forcing the water through the drain hose and into the sink or garbage disposal.

Haier Dishwasher Impeller

The drain impeller forces water into the drain line or garbage disposal through the drain hose. Replace the impeller if it is damaged.

Haier Dishwasher Solenoid Kit

The drain solenoid allows the water to drain from the dishwasher. The valve will not open when the solenoid is not working, causing the dishwasher not to drain.


Haier Dishwasher drain valve

The drain valve may become clogged over time. Clean the valve to ensure water can flow. Replace the drain valve if it is debris-free but still does not work. Drain valves cannot be repaired. If the valve is damaged, it must be replaced.

Haier Dishwasher Control Board

The main control board of a dishwasher provides power to almost every electrical component. A defective board may be unable to supply power to the drain pumps, preventing them from forcing the water through the drain hose and into the sink or garbage disposal.

Haier Dishwasher drain valve

Haier Dishwasher Motor and Pump Assembly

The motor drives the impeller, which forces water out of the drain hose. Check for blockages in the drain line if the engine is running during the drain cycle. The pump and motor assembly may need to be changed if the motor does not run or hums during the drain cycle.


REQUEST SERVICE

Book a Repair Appointment

You can find us here

Haier Dishwasher won’t drain
Scroll to top